MGA9-P-type benzene gravure printing ink is not specifically for the various types of surface treatment of polyolefin films and low high-density low-pressure polyethylene film corona treatment and research, in addition to its properties outside a very good ink adhesion, ink compared to other non-treated matte, its advantages are high light intensity, scratch, excellent wear resistance, dry good, not easy to have back pressure sticking.
Ink characteristics
Widely used in different printing speed from 20 meters to 150 meters per minute, the ink can be completely dry, apply different intaglio etching depth (10 m to 50 m).
For printed material
This series of ink used for all kinds of plastic packaging films such as:
1, no surface treatment of the polyolefin films such as polyethylene (high and low density HDPE / LDPE), polypropylene film (PP) and the like.
2, the surface treatment of the low low-voltage high-density polyethylene film (HDPE).
3, the processing of low-oriented polypropylene film (BOPP).
4, PVC film, aluminum PVC film.
5, aluminum foil and other paper products.
Diluent
You can use standard diluent MGA9 # for dilute use. Depending on the color density or speed demand printing speed, the ink viscosity is recommended:
White Ink: 17-20 seconds Zahn # 2 cup @ 25 ℃
Color ink: 19-24 seconds Zahn No. 2 cup @ 25 ℃
Precautions
1, this series of ink products for MGA9 benzene type, with MGA8903 diluent.
2, this series of ink does not apply to the use of heat or grease resistant.
3, due to the ink characteristics and requirements will be limited by the use of pigment, please contact our technician for guidance.
4. Although this ink through the use of all types of non-treated film, and there are good results, but may not apply to individual plastic film, before use absolutely no problem identifying the ink before use.