<meter id="ufv3w"><del id="ufv3w"></del></meter>
    <optgroup id="ufv3w"></optgroup>
    <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
          <samp id="ufv3w"></samp>

                Follow us :

                Products Center

                21 Series screen printing ink
                This series is designed specifically for printing ink acrylic sheet, not plasticized polyvinyl chloride, polycarbonate and cellulose acetate butyrate formulated.
                Belonging to solvent evaporation drying. Having high brightness, so it is suitable for front and reverse side printing.
                Moldability: good thermoplastic, its flexibility and excellent adhesion, can be applied in a vacuum or inflection mold.
                Solvent: SSI 5000 # (standard) SSI 5500 # (dry)
                It can be used in the printing industry products, gifts, signs, nameplates and other senior decorative fine.
                Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
                 Number Number Hue Hue
                21-L100 a pale lemon yellow 21-P113
                21-V100 21-Q100 purple pink
                21-E100 21-B100 colors ultramarine blue
                21-Y115 golden 21-G100 Green
                21-K100 orange black 21-S125
                21-W100 red white 21-R100
                21-195 light syrup 21-M100 Rose
                1, the printing screen: Most of the photographic and water-soluble films are suitable for use, if the neutral to rigid polyurethane ink scraping with 90-120T mesh gauze, the better.
                2, dilution: SSI 21 series used diluent SSI 5000 #, approximately 15% will be able to achieve the best anti-blocking network performance, especially when stamped in fine print.
                3, Drying: If the prints are separated, ventilation and humidity controls properly, after SSI 21 series ink, just about 20 minutes, the ink film surface is dry.
                4, cleaning: You can use SSI 3000 # wash water network cleaning screen and squeegee.
                5, print volume: the right to use dilution and mesh, the printing ink coverage of this series up to 35 square meters of area per kilogram.
                6, color service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
                1), SSI 21 series of acrylic sheets can be used to print on rigid PVC, cellulose acetate butyrate and polycarbonate plastics, substrates must be cleaned prior to printing the article to prevent any oil left on the surface thereof, such as off agent and other effects of the ink adhesion. SSI 21 Series is suitable for vacuum molding or tortuous as it is thermoplastic, the ink layer becomes soft when heated, and after cooling back to room temperature in order to return to its hardness, so it is easy to make the ink does not apply due to direct contact damaged the plug and mold.
                2), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
                3), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.