<meter id="ufv3w"><del id="ufv3w"></del></meter>
    <optgroup id="ufv3w"></optgroup>
    <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
          <samp id="ufv3w"></samp>

                Follow us :

                Products Center

                12 Series screen printing ink
                This series of ink is a method for direct printing PVC, PC sheet and synthetic light-based screen printing inks. Belonging to solvent evaporation drying.
                Adhesion: the ink is dry it has excellent toughness, corrosion resistance and adhesion.
                        Its resistance level of alcohol is 99.7% ethanol can be friction 100 times 500 gf.
                Solvent: SSI 5000 # (standard) SSI 5500 # (dry)
                It can be used for electronic membrane switch, stickers, stickers, and wall plaques and other soft container.
                Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
                 Number Number Hue Hue
                12-L100 a pale lemon yellow 12-P113
                12-V100 12-Q100 purple pink
                12-E100 12-B100 colors ultramarine blue
                12-Y115 golden 12-G100 Green
                12-K100 orange black 12-S125
                12-W100 red white 12-R100
                12-195 light syrup 12-M100 Rose
                1, the printing screen: In addition to the direct net pulp and solvent bonding, other film version are suitable for use, as the mesh is not particularly limited; however, the use of nylon mesh with polyurethane scraping gum, the effect will be even better. Use should pay attention to the black rubber squeegee, each with the solvent ink react, causing the ink to fade.
                2, dilution: fast drying, but stability is also very good on the screen, when used according to the case transferred to more than 20% of the SSI 5000 # diluent, even in hot weather, the ink on the screen They are very stable and will not appear plug network phenomenon.
                3, Drying: If the prints are separated, ventilation and humidity controls properly, after SSI 12 series ink, just 15 minutes can be an ink layer of the ink film surface is dry, after drying will exhibit excellent brightness.
                4, cleaning: You can use SSI 3000 # wash water network cleaning screen and squeegee.
                5, print volume: the right to use dilution and mesh, the printing ink coverage of this series up to 25-30 square meters per kilogram.
                6, color service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
                1), due to the manufacture of polyvinyl chloride, often adding a large number of auxiliaries and additives, so as to have different characteristics, some of which happened to be seeping to the surface additives or PVC, to make characteristic change and produce inadequate adhesion and surface softening and other issues. So never tried printing film of new varieties, the Greek can first try to print, to be sure there are no problems, only for mass production.
                2), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
                3), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.