<meter id="ufv3w"><del id="ufv3w"></del></meter>
    <optgroup id="ufv3w"></optgroup>
    <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
          <samp id="ufv3w"></samp>

                Follow us :

                Products Center

                11 Series screen printing ink
                This series is suitable for soft and matt printing inks rigid PVC material is a safe, fast-drying, anti-alcohol, anti-stick and easy to print solvent evaporation drying ink.
                Adhesion: good adhesion and weather resistance.
                Solvent: SSI 5000 # (standard) SSI 5500 # (dry)
                Transparency: Please use transparent ink, to increase transparency by adding 195 varnish in the ink.
                It can be used for electronic membrane switch, stickers, stickers.
                Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
                 Number Number Hue Hue
                11-L100 a pale lemon yellow 11-P113
                11-V100 11-Q100 purple pink
                11-E100 11-B100 colors ultramarine blue
                11-Y115 golden 11-G100 Green
                11-K100 orange black 11-S125
                11-W100 red white 11-R100
                11-195 light syrup 11-M100 Rose
                1, the printing screen: photographic and water-soluble film can be used, generally mesh, scraping gum can be used, such as the choice of 90 - 120T net yarn, the better.
                2, dilution: 15-20% is usually added to the solvent in the ink. Namely solvent inks 100g 15 -20g namely 115 -120g.
                3, Drying: 15-30 minutes at room temperature, the ink film surface is dry.
                4, cleaning: It is recommended to use SSI 3000 # wash water network clean screen.
                5, print volume: the right to use dilution and mesh, the printing ink coverage of this series up to 25-30 per kilogram square meters.
                6, color service: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink, etc., to give a reference.
                1), due to the manufacture of polyvinyl chloride, often adding a large number of auxiliaries and additives, so as to have different characteristics, some of which happened to be seeping to the surface additives or PVC, to make characteristic change and produce inadequate adhesion and surface softening and other issues. So never tried printing film of new varieties, the Greek can first try to print, to be sure there are no problems, only for mass production.
                2), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
                3), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.