<meter id="ufv3w"><del id="ufv3w"></del></meter>
    <optgroup id="ufv3w"></optgroup>
    <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
        <samp id="ufv3w"></samp>
          <samp id="ufv3w"></samp>

                Follow us :

                Products Center

                30 Series screen printing ink

                This series of ink is developed for some PET ink, are solvent evaporation type. Printing and post-processing job very well.
                A, this series of inks have good resistance to gasoline, alcohol-resistant, chemical resistance and excellent weather resistance.
                B, printed good workability, high-speed printing of excellent workability can be fine print.
                C, this series of inks has a strong resistance to yellowing and softness, and the abrasion resistance and excellent toughness.

                It can be used to print polyester film ﹑ sticker switch.
                Ink adhesion test:
                Item Test Result
                Cross hatch tape peel adhesion test qualified 100/100
                Hardness Pencil hardness test JIS K5400 8.4 H-2H
                Weather resistant artificial sunlight climate simulator placed 700 hours no abnormal
                Resistance to alcohol use 99.5 percent of alcohol use code 500 100 times without abnormal friction force
                100 Gasoline resistance gasoline usage code 500 no abnormal friction force
                Alkali soaked in NaOH 5% aqueous solvent for 48 hours without abnormal
                Acid resistance in H2SO4 5% aqueous solvent dipped slightly whitened surface 48 hours
                Standard Hue Number: standard hue of this series of ink has been indicated and described in the SSI screen ink color, and can be mixed with each other and with those of other standard color halftone.
                 Number Number Hue Hue
                30-L100-B lemon yellow 30-Q100-B Pink
                30-P113-B light yellow 30-V100-B purple
                30-Y115-B golden 30-E100-B ultramarine
                30-R100-B Red 30-B100-B primary color blue
                30-M100-B Rose 30-G100-B Green
                30-S125-B Orange 30-K100-B black
                30-195-B light syrup 30-W100-B White

                1 dilution: 5000 # diluent using SSI (standard), 10-15% solvent was added in the ink may be printed.
                2, dried: A, 10-20 minutes at room temperature, the ink surface is dry. B, 80 ℃ heated and dried, three minutes and dried ink film surface. C, to be completely dried, preferably at room temperature 24 hours.
                3, cleaning: You can use SSI 3000 # wash water network clean screen.
                4, color matching services: to provide customers with exclusive color matching services, please provide printing materials, the use of mesh, color swatch or ink version, etc., to give a reference.
                1), in accordance with standard health regulations and safety regulations to use this product, there should be no harm to the human body, but as other general chemicals, the use of this product should also try to avoid skin and eye are contaminated, if they splash and should be based on a large number of Rinse, and treatment.
                2), indicating that this technical information and data within the company through many years of research engineers and believed to be accurate, but it does not mean that when the ink use can get the same effect, because this information is based on technical engineers test environment was developed , so when using the ink, should be workshops and operating conditions, after the actual test print and determine whether the customer fit.